Kia Carnival 2022 Owner'S Manual Download Page 369

Page: 369 / 687

Driving your vehicle

Brake system

ESC operation off

This vehicle has 2 kinds of ESC
off states.

If the vehicle stops when ESC

is off, ESC remains off. Upon
restarting the vehicle, the ESC will
automatically turn on again.

ESC off state 1

To turn off the traction control
function and only operate the brake
control function of the ESC, press

the ESC OFF button (ESC OFF

)

for less than 3 seconds and the ESC

OFF indicator light (ESC OFF

) will

illuminate.

ESC off state 2

To turn off the traction control
function and the brake control func

tion of the ESC, press the ESC OFF

button (ESC OFF

) for more than

3 seconds. ESC OFF indicator light

(ESC OFF

) will illuminate and ESC

OFF warning chime will sound. At
this state, the vehicle stability con

trol function does not operate any
more.

Indicator light

ESC indicator light

ESC OFF indicator light

When ENGINE START/STOP button
is turned to ON, the indicator light
illuminates, then goes off if the ESC
system is operating normally.

The ESC indicator light blinks when

ever ESC is operating or illuminates
when ESC fails to operate.

The ESC OFF indicator light comes
on when the ESC is turned off with
the button.

WARNING

Electronic Stability Control

Drive carefully even though your
vehicle has Electronic Stability Con

OMQ4050059L

OMQ4050060L

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Carnival 2022

Reviews:

Kia Carnival 2022, Owner'S Manual, Page: 369 / 687

Search results

Summary of Contents for Carnival 2022

Reviews: