manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 368 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 368

Driving your vehicle

36

5

Brake system

WARNING

For maximum protection, always 
wear your seat belt. No system, no 
matter how advanced, can compen

-

sate for all driver error and/or driv

-

ing conditions. Always drive 
responsibly.

The ESC system is an electronic 
system designed to help the driver 
maintain vehicle control under 
adverse conditions. It is not a sub

-

stitute for safe driving practices. 
Factors including speed, road condi

-

tions and driver steering input can 
all affect whether ESC will be effec

-

tive in preventing a loss of control. It 
is still your responsibility to drive 
and corner at reasonable speeds 
and to leave a sufficient margin of 
safety.

When you apply your brakes under 
conditions which may lock the 
wheels, you may hear a "tik-tik'' 
sound from the brakes, or feel a 
corresponding sensation in the 
brake pedal. This is normal and it 
means your ESC is active.

NOTICE

A click sound may be heard in the 
vehicle compartment when the 
vehicle begins to move after the 
vehicle is started. These conditions 
are normal and indicate that the 

Electronic Stability Control system is 
functioning properly.

ESC operation

ESC ON condition

䳜 When the ENGINE START/STOP 

button is turned ON, ESC and ESC 
OFF indicator lights illuminate for 
approximately 3 seconds, then 
ESC is turned on.

䳜 Press the ESC OFF button for at 

least half a second after turning 
the vehicle ON to turn ESC off. 
(ESC OFF indicator will illuminate). 
To turn the ESC on, press the ESC 
OFF button (ESC OFF indicator 
light will go off).

䳜 When starting the vehicle, you 

may hear a slight ticking sound. 
This is the ESC performing an 
automatic system self-check and 
does not indicate a problem.

When operating

When the ESC is in operation, 
the ESC indicator light blinks.
When the Electronic Stability 

Control is operating properly, you 
can feel a slight pulsation in the 
vehicle. This is only the effect of 
brake control and indicates nothing 
unusual.
When moving out of the mud or 
driving on a slippery road, pressing 
the accelerator pedal may not cause 
the vehicle rpm (revolutions per 
minute) to increase.

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments