manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 344 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 344

Driving your vehicle

12

5

ENGINE START/STOP button

Anti-theft steering column lock (if 
equipped)

The steering wheel locks when the 
ENGINE START/STOP button is in 
the OFF position to protect you 
against theft.
It locks when the door is opened.
If the steering wheel is not locked 
properly when you open the driver's 
door, the warning chime will sound. 
Try locking the steering wheel again. 
If the problem is not solved, have 
the system checked by an autho

-

rized Kia dealer.
In addition, if the ENGINE START/
STOP button is in the OFF position 
after the driver's door is opened, the 
steering wheel will not lock and the 
warning chime will sound. In such a 
situation, close the door. Then the 
steering wheel will lock and the 
warning chime will stop.

NOTICE

If the steering wheel doesn't unlock 
properly, the ENGINE START/STOP 
button will not work. Press the 
ENGINE START/STOP button while 
turning the steering wheel right and 
left to release the tension.

NOTICE

You are able to turn off the engine 
(START/RUN) or vehicle power (ON), 
only when the vehicle is not in 
motion.

CAUTION

In an emergency situation while the 
vehicle is in motion, you are able to 
turn the engine off and to the ACC 
position by pressing the ENGINE 
START/STOP button for more than 2 
seconds or 3 times repeatedly 
within 3 seconds.
If the vehicle is still moving, to 
restart the vehicle:
䳜 Press the ENGINE START/STOP 

button when vehicle speed is 3 
mph (5 km/h) or over.

ACC (Accessory)

Press the ENGINE START/STOP but

-

ton while it is in the OFF position 
without depressing the brake pedal.

The steering wheel unlocks and 
electrical accessories are opera

-

tional.

If the ENGINE START/STOP button is 
in the ACC position for more than 1 
hour, the button is turned off auto

-

OMQ4050294L

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments