manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 343 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 343

11

5

5

Driving your vehicle

ENGINE START/STOP button

WARNING

Steering wheel

Never reach for any controls 
through the steering wheel while 
the vehicle is in motion. The pres

-

ence of your hand or arm in this 
area could cause a loss of vehicle 
control.

If the engine stalls while you are in 
motion, do not attempt to move the 
shift lever to the P (Park) position. If 
traffic and road conditions permit, 
you may put the shift lever in the N 
(Neutral) position while the vehicle is 
still moving and turn the ignition 
switch to the START position in an 
attempt to restart the engine.

CAUTION

Starter

Do not engage the starter for more 
than 10 seconds. If the engine stalls 
or fails to start, wait 5 to 10 sec

-

onds before reengaging the starter. 
Improper use of the starter may 
damage it.

ENGINE START/STOP button (if 
equipped)

Illuminated ENGINE START/STOP 
button

The light will go off after about 30 
seconds when the door is closed. It 
will also go off immediately when 
the theft-alarm system is armed.

ENGINE START/STOP button posi

-

tion

Your vehicle is equipped with four 
different ignition positions.

OFF

To turn off the engine (START/RUN 
position) or vehicle power (ON posi

-

tion), press the ENGINE START/
STOP button with the gear in the P 
(Park) position. When you press the 
ENGINE START/STOP button with

-

out the gear in the P (Park) position, 
the ENGINE START/STOP button will 
not change to the OFF position but 
to the ACC position.

OKA4050100

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments