manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 322 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 322

Features of your vehicle

214

4

Interior features

phone in the middle of the pad for 
maximum efficiency.
If your smart phone is off to the 
side, the charging speed may slow 
down, and in some cases, your 
phone may experience higher 
heat conduction.

䳜 When charging some smart 

phones with a self-protection 
feature, the wireless charging 
speed may decrease, and the 
charging may stop.

䳜 A smart phone that supports the 

wireless charging can only be 
charged wireless.

䳜 The wireless charging pad has an 

internal cooling system which can 
create noise to keep your phone 
cool while it charges.

This device complies with part 15 
of the FCC Rules

Operation is subject to the following 
two conditions:
1. This device may not cause harm

-

ful interference.

2. This device must accept any 

interference received, including 
interference that may cause 
undesired operation.

Coat hook

A Coat hook is next to the rear grab 
handle.

* This actual feature may differ 

from the illustration.

CAUTION

Hanging clothing

Do not hang heavy clothes, since 
they may damage the hook.

WARNING

Do not hang other objects such as 
hangers or hard objects except 
clothes. Also, do not put heavy, 
sharp or breakable objects in the 
clothing's pockets. In an accident or 
when the curtain air bag is inflated, 
it may cause vehicle damage or 
body injury.

OKA4040436

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments