manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 316 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 316

Features of your vehicle

208

4

Interior features

charging can be stopped if the bat

-

tery gets heated up to a certain 
point of temperature that the 
devices can be negatively affected. 
Charging some digital devices is not 
available or requires special dedi

-

cated adapters if their charging 
methods don't fit the way the USB 
car charger works. Quick Charge 2.0 
is available on the smart phone or 
the table PC equipped with fast 
charging capabilities. The applicable 
is as follows: (https://www.qual

-

comm.com/documents/quick-
charge-device-list)

The smart phone or PC tablet with

-

out fast charging is charged at a 
regular speed.

Rated output:
䳜 Digital devices with fast charging:

- 9.0 V, 1.67 A

䳜 Digital devices with normal 

charging:
- 5.0 V, 2.1 A

CAUTION

䳜 Use the USB car charger with the 

ignition on. Otherwise, Vehicle 
battery can be discharged.

䳜 Use the official USB cable of the 

manufacturer of the digital device 
to be charged.

䳜 Make sure that any foreign object, 

drinks, and water do not come 
into contact with the USB car 

charger. Water or foreign object 
can damage the USB charger.

䳜 Do not use the device those cur

-

rent consumption exceeds 2.1 A.

䳜 If the charger is connected incor

-

rectly, it can cause serious dam

-

age on the devices. Please note 
that damages due to incorrect 
usage are not covered by war

-

ranty service.

Power outlet

The power outlet is designed to 
provide power for mobile tele

-

phones or other devices designed to 
operate with vehicle electrical sys

-

tems.

2nd row

OKA4040429L

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments