manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 307 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 307

199

4

4

Features of your vehicle

Storage compartment

Storage compartment

These compartments can be used to 
store small items required by the 
driver or passengers.
䳜 To avoid possible theft, do not 

leave valuables in the storage 
compartment.

䳜 Always keep the storage com

-

partment covers closed while 
driving. Do not attempt to place 
so many items in the storage 
compartment that the storage 
compartment cover cannot close 
securely.

Passenger's side open tray

Console box storage compartment (if 

equipped)

Rotary storage box (if equipped)

䳜 Pull the lever (1)  to open the 

cover. (Used when storing small 
items, etc.)
- The objects with fluid inside are 

fixed with a band (2).

OKA4040414L

OKA4040416N

OKA4040487

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments