manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 301 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 301

193

4

4

Features of your vehicle

Automatic climate control system

From the rear seat

To change the rear air temperature, 
press the button (

) for warmer 

air or press the button (

) for 

cooler air.

Rear fan speed control

From the front seat

Set the rear climate control selec

-

tion (REAR CLIMATE) button to the 
ON position and press the fan speed 
control button in the front climate 
control panel to the desired position.
To change the rear fan speed, press 
the left fan speed button for lower 
speed or right fan speed button for 
higher speed. Press the OFF button 

to turn the rear fan speed control 
off.

From the rear seat

Press the rear fan speed control 
button on the rear control panel to 
the desired position.
To turn off the rear air conditioning 
system press the off button in the 
rear climate control panel.

OKA4040332

OKA4040343

OKA4040331

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments