manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 294 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 294

Features of your vehicle

186

4

Automatic climate control system

Heating and air conditioning manually

The heating and cooling system can be controlled manually by pressing but

-

tons other than the AUTO button.

In this case, the system works sequentially according to the order of but

-

tons selected.
1. Start the vehicle.
2. Set the mode to the desired position.

For improving the effectiveness of heating and cooling;
䳜 Heating: 

䳜 Cooling: 

3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.

If air conditioning is desired, turn the air conditioning system on.

OKA4040307N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments