manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 286 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 286

Features of your vehicle

178

4

Manual climate control system

WARNING

䳜 Continuously using the climate 

control system in the recirculated 
air position may allow humidity to 
increase inside the vehicle which 
may fog the glass and obscure 
visibility.

䳜 Do not sleep in a vehicle with the 

air conditioning or heating system 
on. It may cause serious harm or 
death due to a drop in the oxygen 
level and/or body temperature.

䳜 Continuously using the climate 

control system in the recirculated 
air position can cause drowsiness 
or sleepiness, and loss of vehicle 
control. Set the air intake control 
to the outside (fresh) air position 
as much as possible while driving.

Controlling fan speed

The fan speed control knob allows 
you to control the fan speed of the 
air flowing from the ventilation sys

-

tem.

The ENGINE START/STOP button 
must be in the ON position for fan 
operation.
䳜 To change the fan speed:
䳜 Turn the knob to the right for 

higher speed or left for lower 
speed.

To turn off the blowers:
䳜 Turn the fan speed control knob 

to the "0" position.

Air conditioning (A/C)

Type A

OKA4040538N

OKA4040313

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments