manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 257 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 257

149

4

4

Features of your vehicle

Forward/Reverse Parking Distance Warning

(PDW)

rearward speed is below 6 mph 
(10 km/h).

䳜 When the vehicle's rearward 

speed is below 6 mph (10 km/h), 
both the front and rear ultrasonic 
sensors will detect objects. How

-

ever, the front ultrasonic sensors 
can detect a person, animal or 
object when it is within 24 in. (60 
cm) from the sensors.

䳜 The corresponding indicator will 

illuminate whenever each ultra

-

sonic sensor detects a person, 
animal or object in its sensing 
range. Also an audible warning will 
sound.

䳜 When more than two objects are 

detected at the same time, the 
closest one will be warned with an 
audible warning.

䳜 The shape of the indicator in the 

illustration may differ from the 
actual vehicle.

Malfunction and limitations

Malfunction

After starting the engine, a beep will 
sound when the gear is shifted to R 
(Reverse) to indicate the function is 
operating normally.

However, if one or more of the fol

-

lowing occurs, first check whether 
the ultrasonic sensor is damaged or 
blocked with foreign material. If it 
still does not work properly, have 
the function be inspected by an 
authorized Kia dealer.
䳜 The audible warning does not 

sound.

䳜 The buzzer sounds intermittently.
䳜 The 'Parking sensor error or 

blockage' warning message on the 
cluster

WARNING

䳜 Even vehicles equipped with Park

-

ing Distance Warning, drive care

-

fully and always look around your 
vehicle to make sure there are no 

Distance from 

object

Warning 

indicator

Warning sound

Driving 

backward

24 ~ 48 in.

(60 ~ 120 cm)

Buzzer beeps 

intermittently

12 ~ 24 in.

(30 ~ 60 cm)

Beeps more fre

-

quently

Within 12 in.

(30 cm)

Beeps continu

-

ously

OKA4050133L

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments