Kia Carnival 2022 Owner'S Manual Download Page 227

Page: 227 / 687

119

Features of your vehicle

LCD displays

Information since refueling

This display shows the trip distance,
the average fuel efficiency, and the
instant fuel efficiency (or the total
driving time) since refueling.

䳜 Information since refueling is cal

culated after the vehicle has run
for more than 0.19 miles (300 m).

䳜 If you press "OK" button for more

than 1 second after the informa

tion since refueling is displayed,
the information will be reset.

䳜 If the engine is running, even

when the vehicle is not in motion,
the information will be accumu

lated.

Digital speedometer

This digital speedometer display
shows the speed of the vehicle.

Service mode

This mode reminds you of scheduled
maintenance information.

OKA4040528N

OKA4040532N

OMQ4AH040127

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Carnival 2022

Reviews:

Kia Carnival 2022, Owner'S Manual, Page: 227 / 687

Search results

Summary of Contents for Carnival 2022

Reviews: