manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 221 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 221

113

4

4

Features of your vehicle

LCD display

* The information provided may differ depending on which systems are 

applicable to your vehicle.

5. Convenience

NOTICE

To use the service interval menu, consult an authorized Kia dealer.

* The information provided may differ depending on which functions are 

applicable to your vehicle.

Remote Power 

Doors & Lift

-

gate

To adjust Remote Power Doors & Liftgate
䳜 Off: The Remote Power Doors & Liftgate function is turned off.
䳜 Open Sliding Doors: The sliding doors & liftgate open simultaneou 

sly.

䳜 Open Liftgate & Sliding Doors: The sliding doors & liftgate opens 

simultaneously.

* For more details, refer to "Simultaneous Power Door (if equipped)" 

on page 4-41.

Items

Explanation

Items

Explanation

Seat Easy Access

䳜 Off/Normal/Extended
To select the seat movement.

Rear Occupant Alert

If this item is checked, the Rear Occupant Alert (ROA) dis

-

play will be activated.

Welcome Mirror/Light

䳜 On door unlock/On driver approach
To select the welcome mirror/light function.

Wireless Charging Sys

-

tem

If this item is checked, the wireless charging function will 
be activated.

Auto Rear Wiper (in R)

If this item is checked, the auto rear wiper will be acti

-

vated.

Service Interval

䳜 Enable Service Interval
If this item is checked, the Service Interval function will be 
activated.
䳜 Adjust Interval
If the service interval menu is activated, you may adjust 
the time and distance.
䳜 Reset
To reset the service interval function.

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments