manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 220 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 220

Features of your vehicle

112

4

LCD display

4. Door

Items

Explanation

Automatically 

Lock

䳜 Enable on shift (for Automatic transmission): All doors will be auto

-

matically locked if the vehicle is shifted from the P (Park) position 
to the R (Reverse), N (Neutral), or D (Drive) position. 
(With the Engine ON, it is activated.)

䳜 Enable on speed (for Automatic transmission): All doors will be 

automatically locked when the vehicle speed exceeds 9.3 mph 
(15 km/h)

䳜 Off: The auto door unlock operation will be canceled.
* If the setting is changed while the vehicle is in motion, the changed 

setting may not immediately operate.

Automatically 

Unlock

䳜 On shift to P (for Automatic transmission): All doors will be auto

-

matically unlocked if the gear is shifted to the P (Park) position. 
(With the Engine ON, it is activated.)

䳜 Vehicle Off / On key out (if equipped): All doors will be automati

-

cally unlocked when the ignition key is removed from the ignition 
switch or the ENGINE START/STOP button is set to the OFF posi

-

tion.

䳜 Off: The auto door unlock operation will be canceled.

2 Press Unlock

If this item is checked, the two press unlock will be activated. Press 
the door unlock button once to unlock the driver's door, and press the 
button once more within 4 seconds to unlock the rest of the doors.

Power Liftgate 

Opening Speed

䳜 Fast: The power liftgate will be closed faster than normal speed.
䳜 Normal: The power liftgate will be closed in normal speed.

Power Liftgate 

Opening 

Height

䳜 Full Open/Level 3/Level 2/Level 1/User Height Setting
The power liftgate will be opened in a certain angle.

Liftgate Auto 

Close

To activate or deactivate Liftgate Auto Close.
For more details, refer to "Liftgate Auto Close (if equipped)" on page 
4-55.

Smart Liftgate

To activate or deactivate the Smart Liftgate with Auto Open.
For more details, refer to "Smart Liftgate with Auto Open (if 
equipped)" on page 4-56.

Smart Sliding 

Door

To activate or deactivate the Smart Sliding Door with Auto Open.
For more details, refer to "Smart Sliding Door with Auto Open (if 
equipped)" on page 4-42.

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments