manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 207 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 207

99

4

4

Features of your vehicle

Instrument cluster

You can change the theme by 
selecting "Vehicle →Instrument 
Cluster Setting →Theme Selection" 
on the menu.

NOTICE

The information is displayed after 
getting information from a weather 
information provider via GPS. 
Depending on conditions of GPS 
reception, the information may be 
different from the current weather 
in your area.
If no information is received via GPS 
(e.g., not subscribed to UVO service), 
the weather and time will be dis

-

played as 'sunny' and 'night' on the 
cluster.

Adjusting instrument cluster illumi

-

nation

The brightness of the instrument 
panel illumination is changed by 
pressing the illumination control 
button ("+" or "-") when the ignition 
switch or ENGINE START/STOP but

-

ton is ON, or the taillamps are 
turned on.

WARNING

Never adjust the instrument cluster 
while driving. This could result in 
loss of control and lead to an acci

-

dent that may cause DEATH, SERI

-

OUS INJURY, or property damage.

䳜 If you hold the illumination control 

button ("+" or "-"), the brightness 
will be changed continuously.

䳜 If the brightness reaches to the 

maximum or minimum level, an 
alarm will sound.

OKA4040446N

OMQ4A040558

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments