manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 201 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 201

93

4

4

Features of your vehicle

Mirrors

Outside rear view mirror

Your vehicle is equipped with both 
left-hand and right-hand outside 
rear view mirrors.

Be sure to adjust the mirror angles 
before driving.

The mirrors can be adjusted 
remotely with the control levers or 
remote switch, depending on the 
type of mirror control installed. The 
mirror heads can be folded back to 
prevent damage during an auto

-

matic car wash or when passing 
through a narrow street.

NOTICE

Rear view mirrors

䳜 The outside rear view mirror is 

convex. Objects seen in the mirror 
are closer than they appear.

䳜 Use your interior rear view mirror 

or direct observation to deter

-

mine the actual distance of fol

-

lowing vehicles when changing 
lanes.

CAUTION

Do not scrape ice off the mirror 
face; this may damage the surface 
of the glass. If ice should restrict the 
movement of the mirror, do not 
force the mirror for adjustment. To 
remove ice, use a deicer spray, or a 

sponge or soft cloth with warm 
water.

CAUTION

If the mirror is jammed with ice, do 
not adjust the mirror by force. Use 
an approved spray de-icer (not radi

-

ator antifreeze) to release the fro

-

zen mechanism or move the vehicle 
to a warm place and allow the ice to 
melt.

WARNING

Do not adjust or fold the outside 
rear view mirrors while the vehicle is 
moving. This could result in loss of 
control, and an accident which could 
cause DEATH, SERIOUS INJURY, or 
property damage.

Adjusting the outside rear view 
mirrors

The electric remote control mirror 
switch allows you to adjust the 
position of the left and right outside 
rear view mirrors.

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments