manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 197 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 197

89

4

4

Features of your vehicle

Mirrors

2. The indicator (4) and (6) operates 

as below, if your garage door 
opener has Two-Way Communi

-

cation functionality.

䳜 If the indicator (4) flashes in 

Orange, it indicates that the 
garage door is "Closing".

䳜 The indicator (4) turns solid 

green once the garage door has 
closed.

䳜 If the indicator (6) flashes in 

Orange, it indicates that the 
garage door is "Opening".

䳜 The indicator (6) turns solid 

green once the garage door has 
fully opened.

䳜 If the indicator (4) or (6) does 

not turn to green, it indicates 
that the last status of garage 
door was not received properly. 
The HomeLink mirror tries to 
receive the last known status of 
the garage door for a few sec

-

onds.

3) Recalling Garage Door Status

HomeLink mirror with Two-Way 
Communication provides a way to 
view the last stored message from 
the garage door opener. In order to 
recall the last known status of the 
last activated device, press the but

-

tons "1 and 2" OR "2 and 3" simulta

-

neously.
䳜 If the indicator (4) appears solid 

Green, it indicates that the last 
activated device was "closed" 
properly.

䳜 If the indicator (6) appears solid 

Green, it indicates that the last 
activated device was "open" prop

-

erly.

3. Erasing HomeLink  Buttons

1) Erasing and Reprogramming a 
Single HomeLink  Button:

1. Press and hold the desired Home

-

Link button you want to re-pro

-

gram. DO NOT release the button.

2. The HomeLink indicator light (7) 

will illuminate solid green. Release 
the button as soon as the Home

-

Link indicator light (7) begins to 
flash orange, usually about 20 
seconds.

3. Proceed with the steps in the 

"Programming a New HomeLink 
Button" section.

OKA4040544N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments