manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 188 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 188

Features of your vehicle

80

4

Steering wheel

4. Be sure to adjust the steering 

wheel to the desired position 
before driving.

NOTICE

After adjustment, sometimes the 
lock-release lever may not lock the 
steering wheel.
It is not a malfunction. This occurs 
when two gears engage. In this 
case, adjust the steering wheel 
again and then lock the steering 
wheel.

Heated steering wheel (if equipped)

When the ignition switch or ENGINE 
START/STOP button is in the ON 
position, pressing the heated steer

-

ing wheel button warms the steer

-

ing wheel. The indicator on the 
button will illuminate.

Type A

Type B

To turn the heated steering wheel 
off, press the button once again. 
The indicator on the button will turn 
off.
䳜 The heated steering wheel 

defaults to the OFF position 
whenever the ignition switch or 
ENGINE START/STOP button is in 
the ON position.

NOTICE

The heated steering wheel will turn 
off automatically approximately 30 
minutes after the heated steering 
wheel is turned on.

CAUTION

䳜 Do not install any type of grip 

cover for the steering wheel, it 
may impair the function of the 
heated steering wheel system.

䳜 When cleaning the heated steer

-

ing wheel, do not use an organic 
solvent such as paint thinner, 

OKA4040582N

OKA4040063N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments