manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 179 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 179

71

4

4

Features of your vehicle

Fuel filler door

water. Seek medical attention 
immediately.

䳜 If you swallow fuel, seek medical 

attention immediately. Do not 
induce vomiting.

䳜 Change immediately out of cloth

-

ing that has come into contact 
with fuel.

NOTICE

Damage caused by the wrong fuel

Fuel that does not conform to the 
required quality can lead to 
increased wear as well as damage to 
the engine and exhaust system. 
Only use the fuel recommended.

NOTICE

Damage caused by the wrong fuel

Vehicles with a gasoline engine:
Even small amounts of the wrong 
fuel could result in damage to the 
fuel system, the engine and the 
emission control system.

NOTICE

Do not use diesel or ethanol to 
refuel vehicles with a gasoline 
engine.

NOTICE

Do not switch on the ignition if you 
accidentally refuel with the wrong 
fuel. Otherwise, fuel can enter the 
fuel system.
Even small amounts of the wrong 
fuel could result in damage to the 
fuel system and the engine. Have 
the system serviced by an autho

-

rized Kia dealer.

NOTICE

Do not overfill the fuel tank

Do not overfill the fuel tank; other

-

wise fuel may spill, causing harm to 
the environment and damaging the 
vehicle.

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments