manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 175 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 175

67

4

4

Features of your vehicle

Fuel filler door

Fuel filler door

The vehicle's fuel filler door must be 
opened and closed by hand from 
outside the vehicle.

Opening the fuel filler door

To unlock fuel filler door:
䳜 Press the unlock button on your 

smart key

䳜 Press the Central Door unlock 

button on armrest trim of driver's 
door

䳜 Pull the driver's inside door handle 

outward

1. Turn the engine off.
2. Ensure the driver's door is 

unlocked for unlocking fuel filler 
door.

3. Press the rear center edge of fuel 

filler door.

4. Pull the fuel filler door (1) out to 

fully open.

5. To remove the fuel tank cap (2), 

turn it counterclockwise. You may 
hear a hissing noise as the pres

-

sure inside the tank equalizes.

6. Place the cap on the fuel filler 

door.

NOTICE

Before refueling, be sure to check 
what type of fuel is used for your 
vehicle.
If you put diesel or ethanol fuel into 
a gasoline-powered vehicle, it may 
affect the fuel system and cause 
serious damage to the vehicle.

NOTICE

If the fuel filler door does not open 
because ice has formed around it, 
tap lightly or push on the door to 
break the ice and release the door. 
Do not pry on the door. If necessary, 
spray around the door with an 
approved de-icer fluid (do not use 

OKA4040056L

OKA4040054

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments