manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 172 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 172

Features of your vehicle

64

4

Windows

When the power window and rear 
sunroof lock switch is pressed:
䳜 The driver's master control can 

operate all passengers' power 
windows.

䳜 The front passenger's control can 

operate the front passenger's 
power window.

䳜 The rear passengers' control can

-

not operate the rear passenger's 
power window.

䳜 The rear sunroof control cannot 

operate the rear sunroof. But the 
front master sunroof control can 
operate both front and rear sun

-

roofs (if equipped).

* If the power window lock switch is 

operated (indicator turns on), rear 
passenger cannot open the rear 
window.

CAUTION

䳜 To prevent possible damage to 

the power window system, do not 
open or close two windows or 
more at the same time. This will 

also ensure the longevity of the 
fuse.

䳜 Never try to operate the main 

switch on the driver's door and 
the individual door window switch 
in opposite directions at the same 
time. If this is done, the window 
will stop and cannot be opened or 
closed.

WARNING

Windows

䳜 NEVER leave the keys in your 

vehicle with unsupervised chil

-

dren, when the engine is running.

䳜 NEVER leave any child unattended 

in the vehicle. Even very young 
children may inadvertently cause 
the vehicle to move, entangle 
themselves in the windows, or 
otherwise injure themselves or 
others.

䳜 Always double check to make sure 

all arms, hands, head and other 
obstructions are safely out of the 
way before closing a window.

䳜 Do not allow children play with the 

power windows. Keep the driver's 
door power window lock button in 
the LOCK position (pressed). SERI

-

OUS INJURY can result from unin

-

tentional window operation by 
the child.

䳜 Do not extend heads or any limbs 

outside the window while the 
vehicle is in motion.

OKA4040020L

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments