manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 165 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 165

57

4

4

Features of your vehicle

Smart Liftgate with Auto Open

closed and locked, and 60 in (1.5 
m) from the front door handles. 
(for vehicles equipped with Wel

-

come Light)

䳜 A door is not locked or closed.
䳜 The smart key is in the vehicle.

1. Setting

To activate the Smart Liftgate 
with Auto Open, go to 'User Set

-

tings → Door → Smart Liftgate 
with Auto Open' on the LCD dis

-

play.

2. Detect and Alert

If you are positioned in the 
detecting area (20 ~ 40 in [50 ~ 
100 cm] behind the vehicle) carry

-

ing a smart key, the hazard warn

-

ing lights will blink and chime will 
sound to alert you the smart key 
has been detected and the lift

-

gate will open.

NOTICE

Do not approach the detecting area 
if you do not want the liftgate to 
open. If you have unintentionally 

entered the detecting area and the 
hazard warning lights and chime 
starts to operate, leave the detect

-

ing area with the smart key. The 
liftgate will stay closed.

3. Automatic opening

The hazard warning lights will 
blink and chime will sound 6 times 
and then the liftgate will open.

WARNING

䳜 Make sure you close the liftgate 

before driving your vehicle.

䳜 Make sure there are no people or 

objects around the liftgate before 
opening or closing the liftgate.

䳜 Make sure objects in the liftgate 

do not come out when opening 
the liftgate on a slope. It may 
cause serious injury.

䳜 Make sure to deactivate the 

Smart Liftgate with Auto Open 
when washing your vehicle. Oth

-

erwise, the liftgate may open 
inadvertently.

OKA4040043N

OKA4040041N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments