manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 158 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 158

Features of your vehicle

50

4

Power liftgate

CAUTION

Do not put heavy stuffs on the 
power liftgate when you operate 
the power liftgate. Additional 
weight on liftgate could cause dam

-

ages to the system.

WARNING

Never leave children or animals 
unattended in your vehicle. Children 
or animals might operate the power 
liftgate that could result in injury to 
themselves or others, or damage 
the vehicle.

WARNING

Make sure that there are no people 
or objects in the path of the power 
liftgate (or smart liftgate) prior to 
use. Serious injury, damage to the 
vehicle or damage to surrounding 
objects may result if contact with 
the power liftgate (or smart lift

-

gate) occurs.

CAUTION

Do not close or open the power lift

-

gate manually. This may cause 
damage to the power liftgate. If it is 
necessary to close or open the 
power liftgate manually when the 
battery is discharged or discon

-

nected, do not apply excessive 
force.

WARNING

Make sure there are no people or 
objects around the liftgate before 
opening or closing the power lift

-

gate. Wait until the liftgate is open 
fully and stopped before loading or 
unloading cargo from the vehicle.

Opening the liftgate

The power liftgate will open auto

-

matically by doing one of the fol

-

lowings:
䳜 Press the power liftgate operat

-

ing button on the key or the 
power liftgate open/close button 
on the dash panel for approxi

-

mately one second.

OKA4040550N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments