manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 148 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 148

Features of your vehicle

40

4

Power door ON/OFF button

Power door ON/OFF button (if 
equipped)

When the LED indicator of the 
power door ON/OFF button is OFF, 
the power sliding door and power 
liftgate can be controlled with the 
sub control buttons on the center 
pillar trim or liftgate. Also, the doors 
can be opened and closed automati

-

cally by pulling the inside or outside 
door handles.

When the LED indicator of the 
power door ON/OFF button is ON, 
the power sliding door and power 
liftgate cannot be controlled with 
the sub control buttons or door 
handles. Also, the doors can be 
opened and closed manually by pull

-

ing the inside or outside door han

-

dles.

NOTICE

Do not allow children to play with 
the power sliding door or power lift

-

gate. Keep the LED indicator of the 
power door ON/OFF button ON 
when not in use.

NOTICE

Close the sliding door and liftgate, 
and keep the LED indicator of the 
power door ON/OFF button ON 
before washing the vehicle in an 
automatic car wash.

NOTICE

When the sliding doors and power 
liftgate are opened manually, more 
effort will be required to open and 
close than non-power sliding doors 
and non-power liftgate.

OKA4040034N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments