manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 146 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 146

Features of your vehicle

38

4

Power sliding door

If the power opening or closing is 
blocked by an object or part of the 
body, the power sliding door will 
detect the resistance, then the 
chime will sound 3 times, and stop 
movement or move to the opposite 
direction to allow the object to be 
cleared. However, if the resistance is 
weak such as an object that is thin 
or soft, or the door is near latched 
position, the automatic stop and 
reversal may not detect the resis

-

tance and closing operation will con

-

tinue. Also, if the power sliding door 
is forced by strong impact, the 
automatic stop and reversal may 
operate.

If the automatic stop and reversal 
feature operates continuously more 
than twice during one opening or 
closing operation, the power sliding 
door may stop at that position. At 
this time, close the doors manually 
and operate the door automatically 
again.

WARNING

The automatic stop and reversal 
feature is a supplemental feature. 
Do not solely rely on this function 
when closing the sliding door. Make 
sure that no objects or body parts 
are in the way of the sliding door 
before closing it.

NOTICE

䳜 In cold and wet climates, power 

sliding doors and liftgate may not 
work properly due to freezing 
conditions.

䳜 When the sliding doors are 

opened manually, more effort will 
be required to open and close 
than non-power sliding doors.

NOTICE

䳜 The power sliding door can be 

operated when the engine is not 
running. However the power 
operation consumes large 
amounts of vehicle electric power. 
To prevent the battery from being 
discharged, do not operate them 
excessively.

䳜 To prevent the battery from being 

discharged, do not leave the 
power sliding door at open posi

-

tion for a long time.

䳜 Do not apply excessive force while 

operating the power sliding door. 
This could cause damage to the 
power sliding door.

䳜 When jacking up the vehicle to 

change a tire or repair the vehicle, 
do not operate the power sliding 
door. This could cause the power 
sliding door to operate improp

-

erly.

䳜 It is recommended to wait until 

the power sliding doors are fully 
closed before starting the vehicle. 

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments