manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 123 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 123

15

4

4

Features of your vehicle

Keys

Battery replacement

The remote key or smart key uses a 
3 volt lithium battery which will nor

-

mally last for several years.

If you are unsure how to use or 
replace the battery, contact an 
authorized Kia dealer.
1. Detach mechanical key from your 

smart key.

2. Pry open the key cover.
3. Replace the smart key cover with 

a new battery. (CR2032) When 
replacing the battery, make sure 
the battery position is correct.

4. Install the battery in the reverse 

order of removal.

For remote key or smart key 
replacement, visit an authorized Kia 
dealer.

The remote key or smart key is 
designed to give you years of trou

-

ble-free use, however it can mal

-

function if exposed to moisture or 
static electricity. If you are unsure 
how to use or replace the battery, 
contact an authorized Kia dealer.

Using the wrong battery can cause 
the remote key or smart key to 
malfunction. Be sure to use the cor

-

rect battery.

An inappropriately dis

-

posed battery can be 
harmful to the environ

-

ment and human health. Dispose 
the battery according to your local 
law(s) or regulation.

CAUTION

Remote key/Smart key damage

The remote key or smart key can 
malfunction if dropped, exposed to 
moisture, static electricity, heat or 
direct sunlight.

This device complies with Part 15 
of the FCC rules.

Operation is subject to the following 
two conditions:
1. This device may not cause harm

-

ful interference, and

2. This device must accept any 

interference received, including 
interference that may cause 
undesired operation.

OSP2N049054

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments