manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 108 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 108

Safety features of your vehicle

84

3

Air bag - Advanced Supplemental Restraint

System

WARNING

䳜 Sitting improperly or out of posi

-

tion can cause occupants to be 
shifted too close to a deploying air 
bag, strike the interior structure 
or be thrown from the vehicle 
resulting in serious injury or 
death.

䳜 Always sit upright with the seat

-

back in an upright position, cen

-

tered on the seat cushion with 
your seat belt on, legs comfort

-

ably extended and your feet on 
the floor.

Adding equipment to or modifying 
your air bag-equipped vehicle

If you modify your vehicle by chang

-

ing your vehicle's frame, bumper 
system, front end or side sheet 
metal or ride height, this may affect 
the operation of your vehicle's air 
bag system.

Air bag warning labels

Air bag warning labels, some 
required by the U.S. National High

-

way Traffic Safety Administration 
(NHTSA), are attached to the sun 
visor to alert the driver and passen

-

gers of potential risks of the air bag 
system.

OKA4030160N

OKA4040417N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments