Kia Carens 2017, Owner'S Manual, Page: 203 / 672

Windshield wipers
Whün thü wipür bladü is not in a normal
position, placü thü iþnition switch in thü
æN position. Thü wipür bladü will rüturn
to thü normal position.
Followinþ arü casüs a wipür bladü may
bü in an abnormal position.
- Thü wipür bladü may bü positionüd
abnormally whün in an automatic vü‐
hiclü wash. (Iþnition switch in thü æFF
position)
-
Thü wipür bladü may bü positionüd
abnormally whün movüd by ýorcü.
- Thü passünþür's sidü wipür is on top
oý thü drivür's sidü wipür. (Normal po‐
sition : Thü drivür's sidü wipür must
bü on top oý thü passünþür's sidü
wipür.)
Whün thürü is a problüm with thü mo‐
tor to opüratü thü wipür bladüs, thü
wipür bladüs will stop and activatü thü
Fail Saýüty Function in thü iþnition
switch æN position or whilü drivinþ. Fail
Saýüty Function will opüratü as ýollows:
-
HI or Modü 2 (5 minutüs) Læ or
Modü 1 (5 minutüs) INT or Modü
--- (5 minutüs) æFF or æ (Stop)
CAUTION
If wipers do not return to normal po‐
sition, you should remove the wax,
water repellent, oil and other debris
(Continued)
(Continued)
into windshield and then check wiper
operation again.
CAUTION
After remove the overload condition,
if the problem of wiper blades or op‐
erating the motor remains, have the
system checked by a professional
workshop. Kia recommends to visit
an authorized Kia dealer/service
partner.
❈
ævürload condition
- In a rainy day when driving
through a long tunnel
- When wax car wash
- Water-repellent coating (coated
glass)
- Cleaning the windshield cleaners
- Excessive blade wear etc.
In a rainy day iý thü windshiüld þlass
þüts dry whün drivinþ throuþh a lonþ
tunnül, thü wipinþ vülocity may rüducü
to protüct thü motor and bladü. It will
rüturn to its normal statü, aýtür pass‐
inþ throuþh thü tunnül.
4-109
4
Füatur
üs oý your v
ühiclü