manualshive.com logo in svg

Kia Cadenza 2012, Owner'S Manual, Page: 129 / 375

Share
Download
Kia Cadenza 2012 Owner'S Manual Download Page 129

Features of your vehicle

62

4

Cruise indicator 
(if equipped)

CRUISE indicator

The indicator light illuminates when the
cruise control system is enabled.
The cruise indicator light in the instru-
ment cluster is illuminated when the
cruise control ON-OFF button on the
steering wheel is pushed.
The indicator light turns off when the
cruise control ON-OFF button is pushed
again. For more information about the
use of cruise control, refer to “Cruise
control system or Smart cruise control
system” in section 5.

Cruise SET indicator

The indicator light illuminates when the
cruise function switch (SET- or RES+) is
ON. The cruise SET indicator light in the
instrument cluster or on the LCD screen
is illuminated when the cruise control
switch (SET- or RES+) is pushed. The
cruise SET indicator light does not illumi-
nate when the cruise control switch
(CANCEL) is pushed or the system is
disengaged.

Key reminder warning chime 
(if equipped)

Without smart key system

If the driver’s door is opened while the
ignition key is left in the ignition switch
(ACC or LOCK position), the key
reminder warning chime will sound. This
is to prevent you from locking your keys
in the vehicle. The chime sounds until the
key is removed from the ignition switch or
the driver’s door is closed.

With smart key system

If the driver’s door is opened while the
smart key is in the vehicle with the
engine start/stop button in ACC or the
smart key is in the smart key holder with
the ENGINE START/STOP button in
OFF, the key reminder warning chime will
sound.
The chime sounds until the smart key is
removed from the smart key holder or the
driver’s door is closed.

Overspeed warning 
(if equipped)

Overspeed warning light

If you drive with the speed of 120 km/h or
more, the overspeed warning light will
blink. This is to prevent you from over-
speeding.

Overspeed warning chime (if equipped)

If you drive with the speed of 120 km/h or
more, the overspeed warning chime will
sound for about 5 seconds. This is to pre-
vent you from overspeeding.

120

km/h

SET

CRUISE

Summary of Contents for Cadenza 2012
























































































































































































































































































































































































Reviews:

No comments