manualshive.com logo in svg

Kia Amanti 2009, Owner'S Manual, Page: 262 / 289

Share
Download
Kia Amanti 2009 Owner'S Manual Download Page 262

Maintenance

20

7

WIPER BLADES 

Wiper blade maintenance  

✽

✽

NOTICE

Commercial hot waxes applied by auto-

matic car washes have been known to

make the windshield difficult to clean.  

Contamination of either the windshield or
the wiper blades with foreign matter can
reduce the effectiveness of the wind-
shield wipers. Common sources of con-
tamination are insects, tree sap, and hot
wax treatments used by some commer-
cial car washes. If the blades are not wip-
ing properly, clean both the window and
the blades with a good cleaner or mild
detergent, and rinse thoroughly with
clean water.

Windshield wiper blade replace-
ment  

When the wipers no longer clean ade-
quately, the blades may be worn or
cracked, and require replacement.

✽

✽

NOTICE

The use of a non-specified wiper blade

could result in wiper malfunction and

failure.

CAUTION

To prevent damage to the wiper
blades,

do not use gasoline,

kerosene, paint thinner, or other
solvents on or near them.

CAUTION

To prevent damage to the wiper
arms or other components, do not
attempt to move the wipers manual-
ly.

Ofrecido por www.electromanuales.com

Summary of Contents for Amanti 2009


































































































































































































































































































Reviews:

No comments