manualshive.com logo in svg

Kia Amanti 2009, Owner'S Manual, Page: 223 / 289

Share
Download
Kia Amanti 2009 Owner'S Manual Download Page 223

In case of an emergency

4

6

EMERGENCY STARTING 

Jump starting  

Jump starting can be dangerous if done
incorrectly. Therefore, to avoid harm to
yourself or damage to your vehicle or
battery, follow the jump starting proce-
dures listed on page   6-5. If in doubt, we
strongly recommend that you have a
competent technician or towing service
jump start your vehicle.

✽

✽

NOTICE

Use only a 12-volt jumper system. You

can damage a 12-volt starting motor,

ignition system, and other electrical

parts beyond repair by use of a 24-volt

power supply (either two 12-volt batter-

ies in series or a 24-volt motor generator

set).   

WARNING

- Battery

• Keep all flames or sparks away

from the battery. The battery pro-
duces hydrogen gas which may
explode if exposed to flame or
sparks.

• Do not attempt to jump start the

vehicle if the discharged battery
is frozen or if the electrolyte level
is low; the battery may rupture or
explode.

WARNING

- Battery

Never attempt to check the elec-
trolyte level of the battery as this
may cause the battery to rupture or
explode causing serious injury.

Ofrecido por www.electromanuales.com

Summary of Contents for Amanti 2009


































































































































































































































































































Reviews:

No comments