manualshive.com logo in svg

Kia Amanti 2009, Owner'S Manual, Page: 163 / 289

Share
Download
Kia Amanti 2009 Owner'S Manual Download Page 163

4 29

Driving your vehicle

Distance to empty (km)

This mode indicates the estimated dis-
tance to empty based on the current fuel
in the fuel tank and the amount of fuel
delivered to the engine. When the
remaining distance is below 50 km, “---”
will be displayed and the distance to
empty indicator will blink.
The meter’s working range is from 50 to
999 km.

Average fuel consumption (

l

/100 km)

This mode calculates the average fuel
consumption from the total fuel used and
the distance since the last average con-
sumption reset. The total fuel used is cal-
culated from the fuel consumption input.
For an accurate calculation, drive more
than 50 m.
Pressing the MODE button for more than
1 second, when the average fuel con-
sumption is being displayed, clears the
average fuel consumption to zero (---).
If the vehicle speed exceeds 1 km/h after
refueled more than 6 l, the average fuel
consumption will be cleared to zero (---).

Instant fuel consumption (

l

/100 km)

This mode calculates the instant fuel
consumption every 2 second from the
driving distance and quantity of fuel
injection.

OGH029300L

OGH029301N

OGH029302N

Ofrecido por www.electromanuales.com

Summary of Contents for Amanti 2009


































































































































































































































































































Reviews:

No comments