manualshive.com logo in svg

Kia Amanti 2009, Owner'S Manual, Page: 160 / 289

Share
Download
Kia Amanti 2009 Owner'S Manual Download Page 160

Driving your vehicle

26

4

Instrument panel illumination

When the vehicle’s parking lights or head-
lights are on, rotate the illumination con-
trol knob to adjust the instrument panel
illumination intensity.

Gauges

Speedometer  

The speedometer indicates the forward
speed of the vehicle.

Tachometer  

The tachometer indicates the approxi-
mate number of engine revolutions per
minute (rpm).
Use the tachometer to select the correct
shift points and to prevent lugging and/or
over-revving the engine.
The tachometer pointer may move slight-
ly when the ignition switch is in ACC or
ON position with the engine OFF. This
movement is normal and will not affect
the accuracy of the tachometer once the
engine is running.

Engine temperature gauge  

This gauge shows the temperature of the
engine coolant when the ignition switch
is ON.
Do not continue driving with an overheat-
ed engine. If your vehicle overheats, refer
to “Overheating” in the Index.

CAUTION

Do not operate the engine within
the tachometer's RED ZONE.
This may cause severe engine dam-
age.

CAUTION

If the gauge pointer moves beyond
the normal range area toward the
“H” position, it indicates overheat-
ing that may damage the engine.

OGH036903N

Ofrecido por www.electromanuales.com

Summary of Contents for Amanti 2009


































































































































































































































































































Reviews:

No comments