manualshive.com logo in svg

Kia Amanti 2009, Owner'S Manual, Page: 156 / 289

Share
Download
Kia Amanti 2009 Owner'S Manual Download Page 156

Driving your vehicle

22

4

The Electronic Stability Control (ESC)
monitors information from various vehicle
sensors and then compares  the driver's
commands with the actual behavior of
the vehicle. If an unstable condition is
created by the driver - a sudden evasive
movement for example - ESC intervenes
within fractions of a second via the
engine computer and brake system and
attempts to stabilize the vehicle.

ESC operation

ESC ON condition

• When the ignition is turned

ON, ESC and ESC OFF indi-
cator lights illuminate for
approximately 3 seconds,
then ESC  is turned on.

• Press the ESC OFF button to

turn ESC off. (ESC OFF indi-
cator will illuminate). To turn
the ESC on, press the ESC
OFF button (ESC OFF indica-
tor light will go off).

• When starting the engine,

you may hear a slight ticking
sound. This is the ESC  per-
forming an automatic system
self-check and does not indi-
cate a problem.

When operating

When the ESC is in operation,
ESC indicator light blinks.
• When the Electronic Stability

Control is operating properly,
you can feel a slight pulsation
in the vehicle. This is only the
effect of brake control and
indicates nothing unusual.

• When moving out of the mud

or slippery road, pressing the
accelerator pedal may not
cause the  engine rpm (revo-
lutions per minute) to
increase.

ELECTRONIC STABILITY CONTROL (IF EQUIPPED)

-

ESC

OGH036003N

Ofrecido por www.electromanuales.com

Summary of Contents for Amanti 2009


































































































































































































































































































Reviews:

No comments