manualshive.com logo in svg

Kia Amanti 2009, Owner'S Manual, Page: 132 / 289

Share
Download
Kia Amanti 2009 Owner'S Manual Download Page 132

Knowing your vehicle

122

3

7. CAT/FOLDER Button

• Press [CAT

] or [FLDR

] button to

enter the Category list Mode, it dis-
plays cateogry items and highlights the
category that currently tuned channel
belongs to.

• On Category List Mode, press these

buttons to navigate category list.

• Press [ENTER] Button to select the

lowest channel in highlighted category.

• If channel is selected by selecting cat-

egory CATEGORY Icon is displayed at
the top of the screen.

8. Tune Knob and Enter Button

• Rotate clockwise to increase the chan-

nel number or to down the category in
the category list.

• Rotate counterclockwise to decrease

the channel number or to up the cate-
gory in the category list.

• Press this button to make selection of

channels or items.

❈

❈

Troubleshooting

1. Antenna Error

If this message is displayed, the antenna
or antenna cable is broken or unplugged.
Please consult with your Kia dealership.

2. Acquiring Signal

If this message is displayed, it means
that the antenna is covered and that the
SIRIUS Satellite Radio signal is not avail-
able. Ensure the antenna is uncovered
and has a clear view of the sky.

Ofrecido por www.electromanuales.com

Summary of Contents for Amanti 2009


































































































































































































































































































Reviews:

No comments