Kia 2019 niro, Owner'S Manual, Page: 118 / 551

Safety features of your vehicle
40 4
Child Restraint System (CRS)
To install a child restraint system on
the rear seats, do the following:
1. Place the child restraint system
on a rear seat and route the lap/
shoulder belt around or through
the child restraint, following the
restraint manufacturer's instruc
-
tions.
Be sure the seat belt webbing is
not twisted.
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis
-
tinct "click" sound.
Position the release button so
that it is easy to access in case of
an emergency.
3. Pull the shoulder portion of the
seat belt all the way out. When
the shoulder portion of the seat
belt is fully extended, it will shift
the retractor to the "automatic
locking" (child restraint) mode.
4. Slowly allow the shoulder portion
of the seat belt to retract and lis
-
ten for an audible "clicking" or
"ratcheting" sound. This indicates
that the retractor is in the "auto
-
matic locking" mode. If no distinct
sound is heard, repeat steps 3 and
4.
ODEEV058042NR
ODEEV058043NR
ODEEV058044NR