Kia 2019 niro, Owner'S Manual, Page: 89 / 551

11
4
4
Safety features of your vehicle Seat
WARNING
Driver Position Memory System
Never attempt to operate the driver
position memory system while the
vehicle is moving.
This could result in loss of control,
and an accident causing death or
serious injury.
Storing driver's seat positions
1. Turn the shifter dial into P while
the POWER button is ON.
2. Adjust the driver's seat and out
-
side rearview mirror comfortable
for the driver.
3. Press SET button on the control
panel. The system will beep once.
4. Press one of the memory buttons
(1 or 2) within 4 seconds after
pressing the SET button. The sys
-
tem will beep twice when mem
-
ory has been successfully stored.
When recalling an adjustment mem
-
ory button while sitting in the vehi
-
cle, you can be surprised by the
setting chosen if the memory has
been adjusted by someone else. If
that occurs, immediately push the
seat position control switch in the
direction of the desired position to
stop further undesired movement.
Recalling positions from memory
1. Shift the shift lever into P.
2. To recall the position in the mem
-
ory, press the desired memory
button (1 or 2). The system will
beep once, then the driver's seat
will automatically adjust to the
stored position.
Adjusting the control switch for the
driver's seat while the system is
recalling the stored position will
cause the movement to stop and
move in the direction that the con
-
trol switch is moved.
Easy access function (if equipped)
The system will move the driver's
seat automatically as follows:
䳜 With smart key system
- It will move the driver's seat
rearward when POWER button
is changed to the OFF position.
- It will move the driver's seat
forward when the POWER but
-
ton is changed to the ACC or ON
position.
- It will move the driver's seat
forward when you get in your
vehicle with the smart key after
closing the driver's door.
You can activate or deactivate this
feature. Refer to "User settings
mode" on page 5-56.