manualshive.com logo in svg

Kia 2017 Rio, Owner'S Manual, Page: 163 / 532

Share
Download
Kia 2017 Rio Owner'S Manual Download Page 163

4 93

Features of your vehicle

Fan speed control

The ignition switch must be in the ON
position for fan operation.
The fan speed control knob allows
you to control the fan speed of the air
flowing from the ventilation system.
To change the fan speed, turn the
knob to the right for higher speed or
left for lower speed.

To turn off the blowers

To turn off the blowers, turn the fan
speed control knob to the “0” posi-
tion.

WARNING 

- Reduced

visibility

Continuous use of the climate
control system in the recirculat-
ed air position may allow
humidity to increase inside the
vehicle which may fog the glass
and obscure visibility.

OUB045110

OUB045208L

Summary of Contents for 2017 Rio





















































































































































































































































































































































































































































































































































Reviews:

No comments