Home
/
Kia
/
2016 Optima Hybrid
/
Manual

Kia 2016 Optima Hybrid, Manual, Page: 398 / 466

Share

Page: 398 / 466

Kia 2016 Optima Hybrid Manual Download Page 398

Maintenance

58

7

✽

✽

NOTICE

The actual fuse/relay panel label
may differ depending on equip-
ment/options.

Instrument panel fuse replace-
ment

1. Turn the hybrid system and all

other switches off.

2. Open the fuse panel cover.

OTF074017

CAUTION

- Fuse

Replacement

Do not input any other objects
except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system mal-
function.

WARNING

- Electrical Fire

Always ensure replacement
fuses and relays are securely
fastened when installed. Failure
to do so can result in a vehicle
fire.

WARNING

• When replacing a blown fuse

or relay, make sure the new
fuse or relay fits tightly into
the clips. Failure to tightly
install the fuse or relay may
cause damage to the wiring
and electric systems.

• Do not remove fuses, relays

and terminals fastened with
bolts or nuts. The fuses,
relays and terminals may not
be fastened correctly which
may cause vehicle damage.

«
...
396
397
398
399
400
...
»

Summary of Contents for 2016 Optima Hybrid



















































































































































































































































































































































































































































































Reviews:

No comments