Home
/
Kia
/
2016 Optima Hybrid
/
Manual

Kia 2016 Optima Hybrid, Manual, Page: 370 / 466

Share

Page: 370 / 466

Kia 2016 Optima Hybrid Manual Download Page 370

Maintenance

30

7

Changing the coolant

Have engine and inverter coolant
changed by an authorized Kia dealer
according to the Maintenance
Schedule at the beginning of this
section.

WARNING -

Coolant

• Do not use radiator coolant or

antifreeze in the washer fluid
reservoir.

• Radiator coolant can severely

obscure visibility when
sprayed on the windshield
and may cause loss of vehicle
control or damage to paint
and body trim.

CAUTION

Put a thick cloth or fabric
around the radiator cap and/or
inverter coolant cap before
refilling the coolant in order to
prevent the coolant from over-
flowing into engine parts such
as the generator.

OYFH071006N-1/OYFH071070N-1

Radiator cap

Inverter coolant cap

WARNING

Radiator cap &
Inverter coolant cap

Do not remove the radiator cap
and/or inverter coolant cap
when the engine and radiator
are hot. Scalding hot coolant
and steam may blow out under
pressure causing serious
injury.

«
...
368
369
370
371
372
...
»

Summary of Contents for 2016 Optima Hybrid



















































































































































































































































































































































































































































































Reviews:

No comments