Kia 2016 Optima Hybrid Manual Download Page 238

Page: 238 / 466

4 163

Features of your vehicle

Pairing through [PHONE]
Setup

Press the

key Select

[Phone] Select [Pair Phone]

1. The following steps are the same

as those described in the section
"When No Devices have been
Paired" on the previous page.

•

Bluetooth

Wireless Technology

features supported within the vehi-
cle are as follows. Some features
may not be supported depending
on your

Bluetooth

Wireless

Technology device.
- Outgoing/Incoming

Handsfree

calls

- Operations during a call (Switch

to Private, Switch to call waiting,
MIC on/off)

- Downloading Call History
- Downloading Mobile Contacts
-

Bluetooth

Wireless Technology

device auto connection

- Bluetooth Audio Streaming

• Up to five

Bluetooth

Wireless

Technology devices can be paired
to the Car Handsfree system.

• Only one

Bluetooth

Wireless

Technology device can be con-
nected at a time.

• Other devices cannot be paired

while a

Bluetooth

Wireless

Technology device is connected.

• Only

Bluetooth

Wireless

Technology Handsfree and
Bluetooth audio related features are
supported.

•

Bluetooth

Wireless Technology

related operations are possible only
within devices that support
Handsfree or audio features, such
as a

Bluetooth

Wireless Technology

mobile phone or a Bluetooth audio
device.

• If a connected

Bluetooth

Wireless

Technology device becomes discon-
nected due to being out of commu-
nication range, turning the device
OFF, or a

Bluetooth

Wireless

Technology communication error,
corresponding

Bluetooth

Wireless

Technology devices are automati-
cally searched and reconnected.

• If the system becomes unstable due

to communication errors between
the car Handsfree and the
Bluetooth

Wireless Technology

device, reset the device by turning
off and back on again. Upon reset-
ting

Bluetooth

Wireless Technology

device, the system will be restored.

SETUP

Summary of Contents for 2016 Optima Hybrid



















































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 Optima Hybrid

Reviews:

Kia 2016 Optima Hybrid, Manual, Page: 238 / 466

Search results

Summary of Contents for 2016 Optima Hybrid

Reviews: