manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 8 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 8

3

Normal mode

The normal mode offers medium
steering effort.

Sport mode

The steering wheel becomes heav-
ier. The sport mode is usually used
when driving on the highway.

• For your safety, if you press the

steering mode button while operat-
ing the steering wheel, the steering
effort will not change immediately.
After operating the steering wheel,
the steering effort will change auto-
matically to the selected mode.

• Use caution when changing the

steering mode while driving.

• When the electronic power steer-

ing is not operating properly, the
flex steering wheel will not work.

OVG044504N

■

Type A

■ 

Type B

OVG044501N

OVG044505N

■

Type A

■ 

Type B

OVG044501N

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments