manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 404 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 404

7 75

Maintenance

Waxing

Wax the vehicle when water will no
longer bead on the paint.
Always wash and dry the vehicle
before waxing. Use a good quality
liquid or paste wax, and follow the
manufacturer’s instructions. Wax all
metal trim to protect it and to main-
tain its luster.
Removing oil, tar, and similar materi-
als with a spot remover will usually
strip the wax from the finish. Be sure
to re-wax these areas even if the rest
of the vehicle does not yet need wax-
ing.

CAUTION 

- Wetting engine

• Water washing in the engine

compartment including high
pressure water washing may
cause the failure of electrical
circuits located in the engine
compartment.

• Never allow water or other liq-

uids to come in contact with
electrical/electronic compo-
nents inside the vehicle as
this may damage them.

CAUTION 

- Drying vehicle

• Wiping dust or dirt off the

body with a dry cloth will
scratch the finish.

• Do not use steel wool, abra-

sive cleaners, acid detergents
or strong detergents contain-
ing high alkaline or caustic
agents on chrome-plated or
anodized aluminum parts.
This may result in damage to
the protective coating and
cause discoloration or paint
deterioration.

OJB037800

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments