manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 33 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 33

3 3

Safety features of your vehicle

WARNING - 

Uprighting
seat

Do not press the release lever
on a manual seatback without
holding and controlling the
seatback. The seatback will
spring upright possibly impact-
ing you or other passengers.

WARNING

- 

Loose
objects

Do not place anything in the dri-
ver's foot well or under the front
seats. Loose objects in the dri-
ver's foot area could interfere
with the operation of the foot
pedals.

WARNING

- 

Driver respon-

sibility for passengers

The driver must advise the pas-
senger to keep the seatback in
an upright position whenever
the vehicle is in motion. If a seat
is reclined during an accident,
the restraint system's ability to
restrain will be greatly reduced.

WARNING

- 

Seat cushion

Occupants should never sit on
seat cushions. The passenger's
hips may slide under the lap
portion of the seat belt during
an accident or a sudden stop.

1KMN3662

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments