manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 282 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 282

5 55

Driving your vehicle

To operate the LDWS, press the
switch with the engine start/stop but-
ton in the ON position. The indicator
illuminates on the cluster. To cancel
the LDWS, press the switch again.

If your vehicle leaves the lane when
the LDWS is operating and vehicle
speed exceeds 70km/h (43 mph),
the warning operates as follows:

If you leave the lane, the lane you
leave on the LCD display blinks yel-
low with an 0.8 second interval.

OVG053320

((

((

G

G

G

G

rr

rr

e

e

e

e

e

e

e

e

n

n

n

n

))

))

OVG053321

OVG053322

• When the sensor detects the lane line

• When the sensor doesn’t detect the lane line

OVG053323/OVG053324

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments