manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 258 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 258

5 31

Driving your vehicle

ESC operation off

ESC OFF state

This car has 2 kinds of ESC
off states.
If the engine stops when
ESC is off, ESC remains off.
Upon restarting the engine,
the ESC will automatically
turn on again.

• ESC off state 1
To cancel ESC operation, press the
ESC OFF button (ESC OFF 

)

shortly (ESC OFF indicator light
(ESC OFF 

) illuminates). At this

state, the engine control function
does not operate. It means the trac-
tion control function does not oper-
ate. Brake control function only oper-
ates.

• ESC off state 2
To cancel ESC operation, press the
ESC OFF button (ESC OFF 

) for

more than 3 seconds. ESC OFF indi-
cator light (ESC OFF

) illuminates

and ESC OFF warning chime will
sound. At this state, the engine con-
trol function and brake control func-
tion do not operate. It means the car
stability control function does not
operate any more.

OVG063017N

OVG063016N

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments