manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 237 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 237

Driving your vehicle

10

5

Automatic transaxle operation

The automatic transaxle has 6 for-
ward speeds and one reverse speed.
The individual speeds are selected
automatically, depending on the
position of the shift lever.

✽

✽

NOTICE

The first few shifts on a new vehicle,
if the battery has been disconnected,
may be somewhat abrupt. This is a
normal condition, and the shifting
sequence will adjust after shifts are
cycled a few times by the TCM
(Transaxle Control Module) or
PCM (Powertrain Control Module).

AUTOMATIC TRANSAXLE

OVG053010

+ (UP)

Shift lever

- (DOWN)

To shift, depress the brake pedal and press the button.

The shift lever can be shifted freely.

Press the button when shifting.

Button

WARNING

- Leaving the

Vehicle

Before leaving the driver's seat,
always make sure the shift lever
is engaged in P (Park), set the
parking brake fully and shut the
engine off. Unexpected and sud-
den vehicle movement may occur
if these precautions are not taken.

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments