manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 215 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 215

4 131

Features of your vehicle

Sunglass holder 

To open the sunglass holder, press
the cover and the holder will slowly
open. Place your sunglasses with the
lenses facing out.
To close the sunglass holder push it
up.

WARNING

To reduce the risk of injury in an
accident or sudden stop, always
keep the glove box door closed
while driving.

OVG049153

■

Type A

■

Type B

WARNING

- Sunglass

holder

Do not keep objects except sun-
glasses inside the sunglass
holder. Heavier objects can be
thrown from the holder in the
event of a sudden stop or an
accident, possibly injuring the
passengers.

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments