manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 205 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 205

4 121

Features of your vehicle

✽

✽

NOTICE

For better sound quality, fan speed
may automatically slow down, when
you activate Voice recognition or
Hands free.
- This function will be deactivated in

a few minutes.

Air conditioning

Press the A/C button to turn the air
conditioning system on (indicator
light will illuminate).
Press the button again to turn the air
conditioning system off.

OFF mode

Press the OFF button to turn off the
air climate control system. However,
you can still operate the mode and
air intake buttons as long as the igni-
tion switch is in the ON position.

OVG043134L

OVG043133N

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments