Home
/
Kia
/
2015 Cadenza
/
Owner'S Manual

Kia 2015 Cadenza, Owner'S Manual, Page: 201 / 429

Share

Page: 201 / 429

Kia 2015 Cadenza Owner'S Manual Download Page 201

4 117

Features of your vehicle

Face-Level (B, C, D, E, F)

Air flow is directed toward the upper
body and face. Additionally, each out-
let can be controlled to direct the air
discharged from the outlet.

Bi-Level (B, C, D, E, F)

Air flow is directed towards the face
and the floor.

Floor-Level (A, C, D, E)

Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and
side window defrosters.

Floor & Defrost (A, C, D, E)

Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.

Defrost-Level

Most of the air flow is directed to the
windshield with a small amount of air
directed to the side window
defrosters.

Instrument panel vents

The outlet vents can be opened or
closed separately using the horizon-
tal thumbwheel.
Also, you can adjust the direction of
air delivery from these vents using
the vent control lever as shown.

OVG043127L

OVG043128

«
...
199
200
201
202
203
...
»

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments